NeuroNav NeuroSmart
he problems he problems he problems
Remote Control is not functioning or not connected. 20210525115930.967.png A. Unplug and re-plug the remote control to the system B. Replug the USB adapter the back of computer C. Control the system from the software (GUI) A. Re-plug Headstage green cable from both sides and make sure it's well connected B. Create new workspace using correct HeadStage type 
123    C. Restart the System B. Use Backup Headstage cable C. Use Backup Headstage A. Re-plug Headbox cable from both sides and make sure it's well connected B. Create new workspace using relevant HeadBox configuration (EEG/EMG/ECOG..) C. Restart the system B. Use Backup Headbox cable C. Use Backup Headbox A. Make sure that there is no mismatch between mechnical scale and software depth B. Check if there is Mechanical loads on the HeadStage 
    ected B. Create new workspace using relevant HeadBox configuration (EEG/EMG/ECOG..) C. Restart the system B. Use Backup Headbox cable C. Use Backup Headbox A. Make sure that there is no mismatch between mechnical scale and software depth B. Check if there is Mechanical loads on the HeadStage